Is Tacoma Tap Water Safe? Tacoma Water’s EPA Records

City water quality

Is Tacoma Tap Water Safe? What Tacoma Water’s EPA Records Show

Tacoma Water, which serves about 446,170 people in Washington, reported PFAS detections in the EPA’s UCMR5 monitoring (2023-2025), all below the current EPA limits. Occurrence data, not a compliance finding. Its most recent EPA-record lead 90th-percentile was non-detect (below the reporting limit) — under the current 15 ppb action level. The system has 25 health-based violations on its federal SDWA record.

EPA records (UCMR5 2023-2025 + SDWIS/ECHO)
Tacoma Water
Worth a look
Population served (SDWIS)446,170
PFOA vs 4 ppt limitnon-detect
PFOS vs 4 ppt limitnon-detect
PFHxS vs 10 ppt limit (under reconsideration)5.1 ppt (4/17/2025)
PFNA vs 10 ppt limit (under reconsideration)non-detect
GenX (HFPO-DA) vs 10 ppt limit (under reconsideration)non-detect
Lead 90th percentile (latest round)non-detect (below the reporting limit)
SDWA violations on record (health-based)41 (25)
These are the systems’ own EPA UCMR5 monitoring results — “reported above the limit,” not “in violation.” The EPA limit (4 ppt for PFOA and for PFOS) is a running annual average, so a system counts here when the AVERAGE of a full set of results at one of its sampling locations is above the limit — EPA’s own method. That is an occurrence flag, not a compliance finding: real compliance is determined from quarterly samples reported to the state. Enforcement phases in through 2029-2031.
A metro area is usually served by more than one water system — this page covers the area's largest. Suburbs and neighboring towns often have their own systems with their own results; check your exact ZIP for yours.

See the full interactive report for this system — every PFAS analyte, lead and copper rounds, violations, and the filter that handles what was found: open the Tacoma report → Or check YOUR exact ZIP: check your water by ZIP →

Common questions about Tacoma water

Is Tacoma's tap water safe to drink?

Nothing in these records is above a current EPA limit, but there is something worth watching — a detection below the limit, an older exceedance, or a violation on record. See the card above. These are system-level records for public water systems, not a reading of any individual home’s tap, and they do not cover private wells. Confirm your own utility’s current Consumer Confidence Report, and test your tap if you’re unsure.

Does Tacoma have PFAS in its drinking water?

Tacoma Water reported PFAS detections below current EPA limits in UCMR5 monitoring.

Who supplies Tacoma's drinking water?

Tacoma Water (PWSID WA5386800) serves about 446,170 people, per EPA SDWIS records. A metro area is usually served by more than one water system — this page covers the area’s largest. Suburbs and neighboring towns often have their own systems with their own results; check your exact ZIP for yours.

How do I check my exact address?

Water systems report by system, not by address. Enter your ZIP on the water checker to see the system(s) serving it and what each reported.

Statewide, 8.4% of Washington’s UCMR5-tested systems reported PFOA or PFOS over the EPA limit — see the Washington water page.

Other large systems in Washington

Seattle Vancouver Spokane

See the 100 largest US water systems, water quality by state, and the national PFAS data study.

Sources: EPA UCMR5 occurrence data, Feb 2026 release (~95% complete; final reporting 2026) (2026-06); lead/copper + violations: EPA SDWIS via ECHO; population served: EPA SDWIS via ECHO (system-reported population served). PWSID WA5386800. Public-domain federal/state records; assembly by WaterByTheBook. Built 2026-07-25. Plain-markdown mirror: https://waterbythebook.com/md/tacoma.md